Simple low

Scientific Reports volume 12, Article number: 7963 (2022) Cite this article

1713 Accesses

Metrics details

Additive manufacturing of complex volumetric structures opened new frontiers in many technological fields, turning previously inconceivable designs into a practical reality. Electromagnetic components, including antenna and waveguiding elements, can benefit from exploring the third dimension. While fused deposition modeling (FDM) polymer printers become widely accessible, they manufacture structures with moderately low electromagnetic permittivities, compared to metals. However, metal 3D printers, being capable of producing complex volumetric constructions, remain extremely expensive and hard to maintain apparatus, suitable for high-end market applications. Here we develop a new metal printing technique, based on a low-cost and simple FDM device and subsequent electrochemical deposition. For testing the new method, we fabricated several antenna devices and compared their performances to standard printed FeCl3 etched board-based counterparts, demonstrating clear advantages of the new technique. Our new metal printing can be applied to manufacture electromagnetic devices as well as metallic structures for other applications.

Additive manufacturing enables exploring complex volumetric structures across variety of fundamental and applied disciplines1. The range of new capabilities allows reconsidering conventional approaches in mechanics2,3,4, thermal management5, medicine6, robotics7, electronics8,9, and many others applied areas, e.g.10,11 where novel architectures and material platforms can grant ever foreseen capabilities.

Hardware components, supporting wireless communication links, can also benefit from exploring volumetric geometries. Traditionally, planar architectures of radio frequency (RF) components, including waveguides and antennas, are integrated within printed electronic circuitry. This approach is favourable owing to well-established layer-by-layer lithographic fabrication. Functional 3D printing, however, allows exploring conceptually different designs with potentially better electromagnetic performances. While the surface equivalence principle suggests the ability to replace a volumetric realization with an impedance surface, enclosing the volume of the initial structure12, practical aspects play a role13, underlining real advantages of volumetric designs. Several additive manufacturing techniques were recently developed to create high-quality RF devices14. CNC milling15,16, laser direct structuring17,18,19, conformal printing of metallic inks20,21, ultrasonic wire mesh embedding22, and metal deposition through a mask on curved surfaces23,24 are among a series of the developed methods. Despite the proven performances of the beforehand mentioned techniques, those are designed per a specific task and yet can be considered as an ultimate solution in the field. On the other hand, fused deposition modeling (FDM) printers become available and are extremely low cost, making them the first choice in cases, when fast prototyping of volumetric structures is needed. FDM printers are compatible with a variety of polymer materials, including polylactic acid (PLA), acrylonitrile butadiene styrene (ABS), polyethylene terephthalate glycol (PETG), different alloys, polymer-nanostructures mixtures, and many others. Those plastics were already integrated within antenna devices (e.g.25,26). Furthermore, several polymer materials can be printed in parallel during manufacturing within a single session27,28. However, plastics are dielectrics with a relatively low electromagnetic contrast. Typically, the permittivity ranges between 2.5 and 3.5 at the 1–10 GHz band with the loss tangent of 10−3–10−1 for PLA28. Those numbers, though, depend on fabrication parameters, mainly on the polymer fill factor in a unit volume. Electromagnetic losses become dramatically high if conductive materials, e.g., graphene flakes, are mixed within polymer filaments. Here, loss tangent can approach unity, making those materials almost irrelevant for use in wireless communication devices. An ultimate solution for manufacturing volumetric RF devices is metal printing, e.g., performed with a direct metal laser sintering29. However, metal printers, nevertheless they provide high-quality standalone RF-contrast metal structures, remain extremely expensive, motivating the development of other approaches.

Here we demonstrate a simple and low-cost metal printing, based on a low-grade FDM technique. The new method is described first and then followed by a demonstration of several efficient electromagnetic devices, which are shown to outperform their conventional printed circuit board (PCB) counterparts.

Metals with high RF conductivity allow obtaining superiorelectromagnetic performances. However, only a thin metal layer, having a thickness of several skin depths, governs the interaction30. Typically, several microns of copper is sufficient for the 1–10 GHz frequency range. It is worth noting that electroless plating can be used to cover non-conductive polymers, though this approach requires quite extensive chemical processing steps31,32. Another technique is electroplating, where electrochemical deposition is made on materials with a sufficient low-frequency conductivity. In our case, a structure's 3D-printed skeleton serves as a cathode. For this purpose, initially isolating polymers should become conductive, which is done by introducing small particles. Filaments, made of PLA, mixed with graphene flakes (GPLA), will be used here. DC resistivity of this commercially available material (conductive PLA, 2.85 mm diameter, ‘Proto-pasta’) is about 0.1275 Ω m. It is worth noting that RF conductivity of this material is insufficient for practical applications. The permittivity of GPLA varieties between 52 and 15 at the 1–10 GHz frequency range, while the loss tangent is 0.75–0.8733. However, GPLA skeletons can serve as cathodes in electroplating. Micron to millimetre thickness layers of metals can be deposited on FDM-printed structures and serve GHz electromagnetic applications. However, electrochemically metalized GPLA remains as a substrate and, due to its relatively high permittivity, causes a high field concentration inside its volume, leading to moderately high losses. Those losses severely degrade antenna and waveguide performances, making the profitability of this approach questionable. Consequently, the removal of GPLA skeletons after their electroplating can drastically increase performances of 3D-printed electromagnetic devices. After performing this last skeleton removal step, freestanding metal structures are obtained. This new method will be described next.

The fabrication process is divided into several main steps. The first one is the printing a skeleton. BCN3D Sigmax printer was employed. BCN3D Cura 3.4.0 for slicing the model was used for the prototyping (Fig. 1A). After manufacturing the model, the next step is its post-processing. The structure was treated with a rag, wet with acetone or potentially, with another solvent (e.g., 1,2-dichloroethane, dichloromethane and others). This step allows smoothing roughness, occurred during the printing process own to finite thickness of FDM nozzles, 0.4 mm was used here. However, only small imperfections, e.g., cracks and bubbles, with sizes smaller than 0.5 mm can be efficiently diminished (Fig. 1B). The next stage is the electroplating. After the solvent preparation, the electroconductive part of the model was activated with copper sulfate solution. This makes the model surface more sensitive for further galvanization process due to increased ions adhesion34. To achieve a uniform deposition of metal ions on a surface, the later should be held at nearly uniform electric potential. While typical cathodes with initially high DC conductivity do not possess extra-challenges, GPLA skeletons with moderately high resistivity exhibit a significant voltage drop between adjacent electrodes. To improve the uniformity of the electric potential in this case, we distributed several electrodes along the sample. Those electrodes (copper wires) were isolated from the solution, otherwise the electrochemical deposition will primarily occur on contacts, leaving GPLA skeleton uncovered. After performing those technically uncomplicated steps, auxiliary electrodes of the structure were connected to the negative terminal of a current source (MATRIX MPS-3003L-3). A copper plate, serving as an ion source, was connected to the positive terminal. The galvanic bath contained 70:10:1 of water: Cu2SO4: sulfuric acid. The current in the galvanic circuit was calculated using the empirical ratio of 100 mA for every dm2 of electroconductive model surface, which is a compromise between the deposition quality and its rate. The deposition time is defined by a required metal thickness. The sample was removed from the galvanic bath and washed under running cold water at the end of the process (Fig. 1C). After the GPLA skeleton is metalized, the last stage is to remove the substrate. The melting point of typical polymers, used in FDM printing, is around 180-230ºC. Electrochemically deposited metal, however, sustains those temperatures. Hence, the skeleton can be removed in an oven, though minor oxidation of copper surfaces can be observed if air environment is used. Another option is to apply chemical removal or just burn the plastic with a gas jet, which we used here as the easiest option (Fig. 1D). As the result, the polymer skeleton is melted, whereas metal construction remains standalone—this is our proposed metal printing.

The proposed metal printing—the sequence of a free standing metal coronavirus prototyping. (A) 3D-modelling and slicing. (B) FDM 3D-printing of a conductive PLA (GPLA) skeleton. (C) Electroplating of the prototype's surface. (D) Removal of the plastic skeleton.

The characteristics of the resulting model are as follows: thickness of the metal layer is at least 0.5 mm, which permits the model to remain free standing after the skeleton removal, the overall size of the structure can reach dozens of centimeters along any direction (for our model the maximum is 11.8 cm), surface roughness is smaller than 0.1 mm and the surface coverage is quite uniform in all areas. The fabrication cycle is printing (3–8 h usually), post-processing (0.5–1 h), and electroplating (24–48 h).

To test the performances of the new fabrication technique, radio frequency identification (RFID) was chosen as an application. Rapid development of internet of things (IoT)35 and an emerging concept of internet of small things—IoST (e.g.36) motivates developing new miniature long-range tags with omni-directional responses (e.g.37,38,39). Here, efficient low-cost designs are essential for powering this application. RFID tags consist of an integrated circuit and an antenna, which, in many cases, governs the performances. Exploration of volumetric geometries can provide and advantage over conventional 2D designs.

Hereinafter, we will assess the impact of GPLA removal on antenna performances. A rather generic geometry, reported in40 (Fig. 2A, inset, panel D), will be used for the investigations. The structure is a dipole, considered in the frequency range from 750 MHz to 10 GHz, which captures both: the main resonant area (around 850 MHz, for which the structure was initially designed), and a non-resonant zone (1 to 10 GHz) where the antenna has a more complex radiation pattern and not necessarily impedance-matched. The rather known design was chosen for assessing performances of the new fabrication methodology versus existent standards. CST Microwave Studio was used for the analysis. Thickness of the GPLA substrate was taken as 2 mm uniform and conformal with the antenna. Figure 2A shows the absorbed power within the structure with and without GPLA skeleton. This parameter was calculated as a balance between four channels—power (i) entering launched into antenna port, (ii) total radiated (iii) back reflected to the port owing to the impedance mismatch, and (iv) absorbed. It is evident that GPLA removal significantly reduces the absorption along the entire frequency range. The difference is more pronounced at higher frequencies. In terms of radiation patterns, both configurations show a well-defined dipolar emission at lower frequencies (e.g., 850 MHz, Fig. 2B, and 1.5 GHz, Fig. 2C). However, at higher frequencies (7 GHz, Fig. 2E) low-loss freestanding metal antenna has quadrupole-like radiation pattern, while GPLA skeleton quenches the radiation quite significantly. Since the near-field localization grows with increasing the multipole number (e.g.41,42), the very pronounced difference between the radiation patterns is observed at high frequencies, where GPLA substrate demonstrates a severe absorption. While the structure is not resonant, it still has significant internal losses and cannot be used as a radiation element, underlining the clear advantage of the GPLA substrate removal. This general trend can be further seen while comparing panels (F), (G) and (H), where each horizontal cut of the colour map corresponds to the unwrapped radiation pattern. The GPLA skeleton lead to a significant blurring at higher frequencies. Maximal gain reaches 4 on the linear scale.

Numerical comparison between 2 antennas—with and without GPLA substrate. (A) Normalized absorbed power within the device (in %)—green line—with GPLA, purple—without GPLA. (B), (C) and (E) Radiation patterns at 850 MHz, 1.5 GHz and 7 GHz, respectively. (D) Antenna layout. (F), (G) and (H) Color maps of unwrapped radiation patterns (linear scale). Horizontal and vertical axes—angular and frequency dependences, respectively. Antenna gain is represented by color in linear scale.

To verify the beforehand made claims and assessments, experimental studies have been performed. Standard PCB design and fabrication were made for getting a reference sample. Figure 3 demonstrates the devices—PCB reference (panel A), 3D-printed antenna with GPLA skeleton (panel B), and standalone metal structure, which was obtained after GPLA removal (panel C). Antenna characteristics were acquired at an anechoic chamber (Fig. 3H). The antennas were connected to the Rohde & Schwarz RTO1024 vector network analyser (VNA) using a coaxial cable and mounted on an azimuth-rotary table opposite the measuring horn antenna (also connected to the same VNA). Polystyrene supports, being transparent to GHz waves, were used. The table was rotated between 0° and 360° with 1° steps. Complex transmission coefficients (S12) were obtained for the entire frequency range and for each angle. The colour maps (Fig. 3D–F) summarize the experimental results—horizontal lines are unwrapped angular radiation patterns at the sweep frequencies. Vertical lines represent the evolution of the radiation pattern with frequency. Metal freestanding antenna demonstrates the best performances, compared to both references. The advantage is more pronounced at higher frequencies, where both GPLA and FR4 (PCB material) have higher losses. Total radiation efficiencies of the samples were measured, and the results appear in Fig. 3G. Metal antenna outperforms the counterparts for all the frequencies within the band apart from several points, where the results fluctuated owing to parasitic reflections from the measurement apparatus.

Experimental data representation. Comparison between (A) PCB-based, (B) GPLA substrate and (C) Free standing metal antennas. (D–F) Color maps of unwrapped radiation patterns (linear scale). Horizontal and vertical axes—angular and frequency dependences, respectively. Received energy is represented in linear scale, arbitrary units. (G) Radiation efficiency, as the function of frequency. PCB-based antenna—orange line, GPLA-based antenna—green, and metal antenna—purple. (H) Photograph of the experimental setup in an anechoic chamber.

A new simple and low-cost metal printing approach have been developed and its advantages in the field of additively manufactured electromagnetic devices were demonstrated. Our method is based on FDM printing of skeletons with the subsequent set of relatively straightforward post-processing operations. The process is summarized in the following five steps: (i) 3d printing of a skeleton with a conductive polymer, (ii) surface treatment for improving smoothness, (iii) auxiliary electrodes distribution on the skeleton, (iv) electroplating, and (v) skeleton removal. As the result of the process, freestanding metal structures can be obtained. The advantage of the substrate removal was analysed numerically and experientially, demonstrating significant improvement of antenna characteristics. In particular, high frequency loses were reduced by orders of magnitude compared to samples, where conductive polymer skeleton was present. The differences are much more pronounced at higher frequencies, where conductive polymers have looser performances. Furthermore, free-standing metal antennas, made by our new printing process, were shown to outperform standard PCB-based realizations, which also suffer from losses at frequencies above 5 GHz, if FR4 substrates are in use.

Though it is evident that our new method cannot compete with direct metal printing, based e.g., on laser sintering, on performances, it can provide sufficient solutions at extremely low cost. It is worth noting that fabricated structures had to be of an opened geometry for allowing the melted polymer flow out. The further advancement of this technology can allow creating more complex shapes and reveal their advantages in electromagnetic applications. Furthermore, there are quite a few efforts to 3D-print electronic circuitry—both passive and active elements. Given this capability developed, additive manufacturing of an antenna together with tunable electronics will become possible. The overall production cost in this case can drop significantly, making additive manufacturing of RF devices to be the referable first choice.

Gibson, I., Rosen, D. & Stucker, B. Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing (Springer-Verlag, 2015).

Book Google Scholar

Yang, Y. et al. Electrically assisted 3D printing of nacre-inspired structures with self-sensing capability. Sci. Adv. https://doi.org/10.1126/SCIADV.AAU9490 (2019).

Article PubMed PubMed Central Google Scholar

Ge, Q. et al. 3D printing of highly stretchable hydrogel with diverse UV curable polymers. Sci. Adv. https://doi.org/10.1126/SCIADV.ABA4261 (2021).

Article PubMed PubMed Central Google Scholar

van Manen, T., Janbaz, S., Jansen, K. M. B. & Zadpoor, A. A. 4D printing of reconfigurable metamaterials and devices. Commun. Mater. 2021 21 2(1), 1–8. https://doi.org/10.1038/s43246-021-00165-8 (2021).

Article Google Scholar

Kim, F. et al. Direct ink writing of three-dimensional thermoelectric microarchitectures. Nat. Electron. 2021 48 4(8), 579–587. https://doi.org/10.1038/s41928-021-00622-9 (2021).

Article CAS Google Scholar

Paunović, N. et al. Digital light 3D printing of customized bioresorbable airway stents with elastomeric properties. Sci. Adv. https://doi.org/10.1126/SCIADV.ABE9499 (2021).

Article PubMed PubMed Central Google Scholar

Keneth, E. S., Kamyshny, A., Totaro, M., Beccai, L. & Magdassi, S. 3D printing materials for soft robotics. Adv. Mater. 33(19), 2003387. https://doi.org/10.1002/ADMA.202003387 (2021).

Article Google Scholar

Carvalho Fernandes, D. C., Lynch, D. & Berry, V. 3D-printed graphene/polymer structures for electron-tunneling based devices. Sci. Rep. 2020 101 10(1), 1–8. https://doi.org/10.1038/s41598-020-68288-5 (2020).

Article CAS Google Scholar

Pandey, R. et al. Highly conductive copper film on inkjet-printed porous silver seed for flexible electronics. J. Electrochem. Soc. 165(5), D236. https://doi.org/10.1149/2.1331805JES (2018).

Article CAS Google Scholar

Maurya, D. et al. 3D printed graphene-based self-powered strain sensors for smart tires in autonomous vehicles. Nat. Commun. 2020 111 11(1), 1–10. https://doi.org/10.1038/s41467-020-19088-y (2020).

Article CAS Google Scholar

Blutinger, J. D. et al. Precision cooking for printed foods via multiwavelength lasers. npj Sci. Food 2021 51 5(1), 1–9. https://doi.org/10.1038/s41538-021-00107-1 (2021).

Article Google Scholar

Balanis, C. A. Advanced Engineering Electromagnetics (Wiley, 1989).

Google Scholar

Kosulnikov, S., Filonov, D., Boag, A. & Ginzburg, P. Volumetric metamaterials versus impedance surfaces in scattering applications. Sci. Rep. 11(1), 9571. https://doi.org/10.1038/s41598-021-88421-2 (2021).

Article ADS CAS PubMed PubMed Central Google Scholar

Liang, M., Wu, J. & Yu, X. 3D printing technology for RF and THz antennas. IEEE 2, 536–537 (2016).

Google Scholar

Ferrando-Rocher, M., Herranz, J. I., Valero-Nogueira, A. & Bernardo, B. Performance assessment of gap waveguide array antennas: CNC milling vs. 3D printing. IEEE Antennas Wirel. Propag. Lett. https://doi.org/10.1109/LAWP.2018.2833740 (2018).

Article Google Scholar

Al-Tarifi, M. A. & Filipovic, D. S. On the design and fabrication of W-band stabilised-pattern dual-polarised horn antennas with DMLS and CNC. IET Microw. Antennas Propag. 11(14), 1930–1935. https://doi.org/10.1049/iet-map.2017.0167 (2017).

Article Google Scholar

Sonnerat, F., Pilard, R., Gianesello, F., Le Pennec, F., Person, C. & Gloria, D. Innovative LDS antenna for 4G applications. In IEEE, no. Eucap, 2696–2699 (2013).

Friedrich, A., Fengler, M., Geck, B. & Manteuffel, D. 60 GHz 3D integrated waveguide fed antennas using laser direct structuring technology. In 2017 11th European Conference on Antennas and Propagation, EUCAP 2017 2507–2510 (2017). https://doi.org/10.23919/EuCAP.2017.7928511

Friedrich, A. & Geck, B. On the design of a 3D LTE antenna for automotive applications based on MID technology. Eur. Microw. Conf. https://doi.org/10.23919/EuMC.2013.6686737 (2013).

Article Google Scholar

Adams, J. J. et al. Comparison of spherical antennas fabricated via conformal printing: Helix, meanderline, and hybrid designs. IEEE Antennas Wirel. Propag. Lett. 10, 1425–1428. https://doi.org/10.1109/LAWP.2011.2178999 (2011).

Article ADS Google Scholar

Ahmadloo, M. Design and fabrication of geometrically complicated multiband microwave devices using a novel integrated 3D printing technique. In 2013 IEEE 22nd Conference on Electrical Performance of Electronic Packaging and Systems 29–32 (2013). https://doi.org/10.1109/EPEPS.2013.6703460

Liang, M., Shemelya, C., MacDonald, E., Wicker, R. & Xin, H. 3-D printed microwave patch antenna via fused deposition method and ultrasonic wire mesh embedding technique. IEEE Antennas Wirel. Propag. Lett. 14, 1346–1349. https://doi.org/10.1109/LAWP.2015.2405054 (2015).

Article ADS Google Scholar

Ehrenberg, I., Sarma, S., Steffeny, T. & Wuy, B.-I. Fabrication of an X-Band conformal antenna array on an additively manufactured substrate. In 2015 IEEE International Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting 609–610 (2015). https://doi.org/10.1109/APS.2015.7304691

Wu, B. -I. & Ehrenberg, I. Ultra conformal patch antenna array on a doubly curved surface. In 2013 IEEE International Symposium on Phased Array Systems and Technology 792–798 (2013). https://doi.org/10.1109/ARRAY.2013.6731929

Mirzaee, M., Noghanian, S. & Chang, I. Low-profile bowtie antenna with 3D printed substrate. Microw. Opt. Technol. Lett. 59(3), 706–710. https://doi.org/10.1002/mop.30379 (2017).

Article Google Scholar

Shemelya, C. et al. Multi-layer archimedean spiral antenna fabricated using polymer extrusion 3D printing. Microw. Opt. Technol. Lett. 58(7), 1662–1666. https://doi.org/10.1002/mop.29881 (2016).

Article Google Scholar

Parsons, P., Mirotznik, M., Pa, P. & Larimore, Z. Multi-material additive manufacturing of embedded low-profile antennas. Electron. Lett. 51(20), 1561–1562. https://doi.org/10.1049/el.2015.2186 (2015).

Article ADS Google Scholar

Filonov, D. et al. Volumetric 3D-printed antennas, manufactured via selective polymer metallization. Phys. Status Solidi Rapid Res. Lett. https://doi.org/10.1002/pssr.201800668 (2019).

Article Google Scholar

Gupta, M. 3D Printing of Metals. MDPI AG (2017).

Jackson, J. D. Classical Electrodynamics 3rd edn. (Wiley, 1998).

MATH Google Scholar

Dubin, V. M., Shacham-Diamand, Y., Zhao, B., Vasudev, P. K. & Ting, C. H. Selective and blanket electroless copper deposition for ultralarge scale integration. J. Electrochem. Soc. 144(3), 898. https://doi.org/10.1149/1.1837505 (1997).

Article ADS CAS Google Scholar

Filonov, D. et al. Flexible metalized tubes for electromagnetic waveguiding. J. Quant. Spectrosc. Radiat. Transf. https://doi.org/10.1016/j.jqsrt.2019.05.008 (2019).

Article Google Scholar

Filonov, D., Kolen, S., Shmidt, A., Shacham-Diamand, Y., Boag, A. & Ginzburg, P. Selective metallization of graphene-based polymers for volumetric 3D-printed antennas. In 2019 IEEE International Conference on Microwaves, Antennas, Communications and Electronic Systems (COMCAS) 1–5 (2019). https://doi.org/10.1109/COMCAS44984.2019.8958413

M. H. Ф., Гaльвaничecкиe пoкpытия диэлeктpикoв. Mинcк: Издaтeльcтвo "Бeлapycь", (1987).

Da Xu, L., He, W. & Li, S. Internet of things in industries: A survey. IEEE Trans. Ind. Inform. 10(4), 2233–2243. https://doi.org/10.1109/TII.2014.2300753 (2014).

Article Google Scholar

Mikhailovskaya, A. et al. Omnidirectional miniature RFID tag. Appl. Phys. Lett. 119(3), 033503. https://doi.org/10.1063/5.0054740 (2021).

Article ADS CAS Google Scholar

Choudhary, A., Sood, D. & Tripathi, C. C. Wideband long range, radiation efficient compact UHF RFID tag. IEEE Antennas Wirel. Propag. Lett. 17(10), 1755–1759. https://doi.org/10.1109/LAWP.2018.2844249 (2018).

Article ADS Google Scholar

Byondi, F. K. & Chung, Y. Longest-range UHF RFID sensor tag antenna for IoT applied for metal and non-metal objects. Sensors 19(24), 5460. https://doi.org/10.3390/s19245460 (2019).

Article ADS PubMed Central Google Scholar

Dobrykh, D. et al. Long-range miniaturized ceramic RFID tags. IEEE Trans. Antennas Propag. 69(6), 3125–3131. https://doi.org/10.1109/TAP.2020.3037663 (2021).

Article ADS Google Scholar

Yang, L., Zhang, R., Staiculescu, D., Wong, C. P. & Tentzeris, M. M. A novel conformal RFID-enabled module utilizing inkjet-printed antennas and carbon nanotubes for gas-detection applications. IEEE Antennas Wirel. Propag. Lett. 8, 653–656. https://doi.org/10.1109/LAWP.2009.2024104 (2009).

Article ADS Google Scholar

Hansen, R. C. Electrically Small, Superdirective, and Superconducting Antennas (Wiley-Interscience, 2006).

Book Google Scholar

Vovchuk, D., Kosulnikov, S., Noskov, R. E. R. E. & Ginzburg, P. Wire resonator as a broadband Huygens superscatterer. Phys. Rev. B https://doi.org/10.1103/physrevb.102.094304 (2020).

Article Google Scholar

Download references

The research was supported in part by of the federal academic leadership program Priority 2030 and by Israeli Ministry of Science and Technology (Project "Integrated 2D & 3D Functional Printing of Batteries with Metamaterials and Antennas"). The authors are thankful to Prof. Yosi Shacham-Diamand, Tel Aviv University, for discussions.

Center for Photonics and 2D Materials, Moscow Institute of Physics and Technology, Dolgoprudny, Russia, 141700

Vladimir D. Burtsev, Tatyana S. Vosheva & Dmitry S. Filonov

Telecom R&D Center, Moscow Institute of Physics and Technology, Dolgoprudny, Russia, 141700

Anton A. Khudykin

School of Electrical Engineering, Tel Aviv University, 69978, Tel Aviv, Israel

Pavel Ginzburg

You can also search for this author in PubMed Google Scholar

You can also search for this author in PubMed Google Scholar

You can also search for this author in PubMed Google Scholar

You can also search for this author in PubMed Google Scholar

You can also search for this author in PubMed Google Scholar

V.B. and P.G. wrote the main manuscript text and conducted a literature review. V.B., P.G. and D.F. prepared Figs. 1, 2 and 3. V.B., T.V. and A.K. conducted numerical simulations. P.G. and D.F. identified the theoretical prerequisites and carried out supervision. All authors reviewed the manuscript.

Correspondence to Vladimir D. Burtsev.

The authors declare no competing interests.

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.

Reprints and Permissions

Burtsev, V.D., Vosheva, T.S., Khudykin, A.A. et al. Simple low-cost 3D metal printing via plastic skeleton burning. Sci Rep 12, 7963 (2022). https://doi.org/10.1038/s41598-022-11430-2

Download citation

Received: 03 February 2022

Accepted: 13 April 2022

Published: 13 May 2022

DOI: https://doi.org/10.1038/s41598-022-11430-2

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.