Free Sdk Small Size Long Range Low Power Supply UHF Reader 4 Ports RFID Senior Module
UHF SENIOR Module (Four Port) General description ST-M914 is a high performance UHF RFID Module. It is designed based on
Basic Info
Model NO. | M914 RFID Module |
Type | M914 RFID Module |
Card Type | Mifare, UHF |
Interface | Serial Port, RS232.Wg26.Relay |
Reading Distance | >10m |
Application | Parking, Hospital, Company, Bank, Store |
Protocol | ISO18000-6b/6c(EPC C1g2) |
Power Supply | DC 9V-24V |
Communication | RS232, Wiegand26,Relay |
Frequency | 865~868MHz, 902~928MHz (EU&Us ) |
RF Power | 30 dBm Adjustable |
Transport Package | Size: 30*23*13cm(Us) |
Specification | Size: 76.5*51*10.1mm |
Trademark | Focus RFID |
Origin | Shenzhen |
HS Code | 8471900090 |
Production Capacity | 10, 000, 000 PCS/Year |
Product Description
UHF SENIOR Module
(Four Port)
General description
ST-M914 is a high performance UHF RFID Module. It is designed based on Senior Imported chip. Based on proprietary efficient digital signal processing algorithm, it supports fast tag read/write operation with high identification rate. It can be widely applied in many RFID application systems such as logistics, access control, and industrial production process control system.
Technical Parameter
Model | ST-914 |
Chip solution | High performance Senior Imported Chip (compatible with Impinj R2000) |
Frequency | 865~868MHz (EU),902~928MHz(US) |
Protocol | ISO18000-6C (EPC GEN2) |
RF power | 30dbm (adjuatable) |
Receive Sensitivity | ≤-87dBm |
Inventory Speed | 300pcs/s |
Work mode | Answer mode,real-time inventory mode |
Reading distance | 0~15 meter (depends on antenna & tag) |
Power supply | 3.3~5V DC |
Interface | RS232 (TTL 3.3V level ) |
Antenna port | 4 SMA female connector |
GPIO | 2 input & 2 output |
Firmware upgrade | Support |
Size | 76.5*51*10.1mm |
Weight | 42g |
Working temperature | -20~+55ºC |
Storage temperature | -20~+85ºC |
No. | Symbol | Comment |
1 | GND | Ground |
2 | GND | |
3 | VCC | Power Supply |
4 | VCC | |
5 | GPO1 | General output (3.3V TTL level) |
6 | GPO1 | |
7 | GPI1 | General input (3.3V TTL level) |
8 | BUZZER | Buzzer driver output, high level effective. Current sourcing over 50mA |
9 | RXD | Serial data input |
10 | TXD | Serial data output |
11 | USB-DM | For test only |
12 | USB-DP | |
13 | GPI2 | General input (3.3V TTL level) |
14 | EN | Enable. High level effective with internal 10kOhm resistor pulled up to VCC |
15 | RS485_CTRL | RS-485 direction control |
Send to us